You’ve finally decided to take the plunge and install an air conditioner in your home. Now you are only interested in how to install AS as summertime is rapidly approaching, and the last thing you want is to be stuck in a sweltering house with no relief. But before you start shopping for units or searching for AS installation service, you need to keep a few essential things in mind. Here are seven guidelines to help you ensure a smooth AC installation process:
1. Wall Stability
The split air conditioner’s indoor unit must be mounted on a wall that can support the unit’s weight. Make sure the wall where the air conditioners inside the unit will be mounted is sturdy enough. It should be able to withstand the unit’s vibrations.
2. Spacing
At least 10 – 15 cm of free space around the top and sides of the split AC’s indoor unit is recommended. Inhibiting airflow may make it more challenging to expel heat. This will raise the operating costs of your air conditioner. It also has the possibility of damaging the compressor. Wrong spacing would impact AC service efficiency, so it is essential to choose the proper spacing.
3. Installation location
Make sure the interior and outdoor units are in the same place. You don’t want to put the air conditioner somewhere where it won’t cool or where it will chill so much that it makes you feel like you’re in the Arctic. Professional AC installation services are aware of AC installation location importance and usually acknowledge it to their customers.
4. Indoor unit height
A 7-8 ft above the ground is recommended for optimum cooling in a 10 ft high room. This will confirm that the cool air disperses evenly throughout the room. It also provides that the air conditioner is not overworked, cooling the hot roof and resulting in a higher electric bill. Considering indoor unit height beforehand, like spacing distance, would help reach AS service efficiency.
5. Location of an outdoor unit
AC installation preferred to be indoor and outdoor units away from direct sunlight and water for proper cooling. Install the split AC outdoor unit in an open area so that the heat dissipated from the condenser is not blocked.
It is also critical to place the outdoor unit on a flat surface. The outdoor unit houses all of your air conditioner’s essential components, including the compressor and condenser. Outdoor units are vibrating. If the surface is not flat, continuous vibration, particularly during the summer months when the air conditioner is used almost constantly, can cause compressor and condenser damage. A faulty compressor and condenser are useless. This will raise your service costs and, in the worst-case scenario, necessitating the replacement of the unit itself, so you should apply for the other AC service to solve your problems.
6. Efficient Ductwork
Efficient Ductwork: Before thinking about AC installation, make sure your ductwork is in good condition. Seal the joints to keep cool air in the room. Ducts that are old or inefficient can leak up to 20% of the cool air in the environment. To resolve duct problems, you can hire the services of a professional company or an AC technician. They thoroughly inspect the systems and quickly resolve any issues.
The distance between both units is critical to ensuring that your air conditioner performs optimally and efficiently—the shorter the length, the better the performance. TCL experts recommend that the unit be no more than 15 meters apart. That is the optimal distance that would help to reach AC service potential efficiency.
By following these straightforward procedures, you can ensure that your AC installation goes smoothly without any problems. Before contemplating how to install an AC, you should plan the process first to get the best results. With some planning and practice, you can have your new unit up and running in no time!
