Composite decking material like Trex or TimberTech have become increasingly popular in the last few years, with good reason. They’re durable, low-maintenance and easy to clean, but there’s one thing you definitely shouldn’t do if you want your deck to look as good as new: pressure washing your composite decking with high-pressure water and strong detergents will damage the finish and discolor your deck.
Introduction
Pressure washing your composite decking is not recommended. Using the wrong amount of pressure or too close of pressure can be ruinous to the composite material and make it look as if it’s been etched. Wood decks are much more durable, but they are more susceptible to damage from water saturation.
The best way to clean your deck is by using a high-quality deck cleaner, such as Fantastic All Purpose Cleaner or One Step Wood Cleaner. These cleaners will do an excellent job of removing dirt, algae, mold and mildew from the surface without damaging the deck. You can also use a soft brush attachment on your hose for difficult stains. Never power wash wood decks because this will cause excessive wetness that could lead to rotting boards or mold and mildew growth which may cost you in costly repairs later on.
Must Read: A Few Important Tips For An Effective Office Refurbishment
What is composite decking?
Composite decking is made of recycled plastic and wood fibers. The komposittrall is softer than natural wood and therefore can be etched more easily. Pressure washing too close or using too much pressure can be ruinous for your deck. Wood decks are the most popular option, but the composite material has many advantages over it, such as not needing to be stained or painted, being resistant to mold, termites and fungal decay.
What are the risks of pressure washing composite decking?
Pressure washing your deck is not usually recommended for composite decking. If done incorrectly, it can be a big mistake. Pressure washing too close or using too much pressure can be ruinous for your deck. The composite material is softer than natural wood and therefore can be etched more easily. Pressure washing will remove the sealant that protects the boards against UV rays, which causes discoloration to occur over time. Severe pressure-washing damage to the board’s surface might also lead to fuzzy areas that are difficult to clean with regular household cleaning products; scrubbing will result in irreversible damage of the soft composite material.
The fiberglass material of which composites are made also has no grain pattern like natural wood does so there is no stain hiding like you would find on wood decks.
How to clean composite decking the right way
Composite decking material is softer than natural wood, so it must be treated with care. There are many ways to clean composite decking, but pressure washing is not usually recommended for these types of decks. If done incorrectly, pressure washing can be detrimental to your deck. The composite decking material is softer than natural wood and therefore more easily etched. So while you might think pressure washing will do the job and save you time, the opposite is true. For all those reasons, pressure washing should be avoided when caring for komposittrall problem.
Conclusion
Pressure washing is not usually recommended for composite decking. If done incorrectly, it can be a big mistake. Pressure wash too close or using too much pressure can be ruinous for your deck. The composite material is softer than natural wood and therefore can be etched more easily. Take the time to research how to properly clean your deck and use safe cleaning methods such as soft cloths, mild soapy water, and microfiber mops instead of power washers. These options will help keep your wood deck intact and looking great for years to come!
Also Read : Top 10 of the Best Smart Home Devices
